![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
I've been looking at RODI units lately for a new reef tank setup, and
found the item listed below. Basically it's a 6 stage 100gpd unit for $110. Seems like it's too good to be true, but I don't know enough about these to tell if there's something fundamentally wrong with it. Can anyone offer more expert insight? TIA P.S. I hope my post isn't misconstrued as a feeble advertising attempt; I swear I'm not affilitated with seller/store, I'm just some guy trying not to get ripped off! http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=20 756 |
#2
|
|||
|
|||
![]()
"stephane" wrote in message ...
Basically it's a 6 stage 100gpd unit for $110. Have you previously conducted any business on eBay? You would know that price two days before the auction end is usually far away from the price the item sells for... Do not be surprised if the price will jump $20, 40 or even more just one minute before the end... |
#3
|
|||
|
|||
![]()
http://cgi.ebay.com/ws/eBayISAPI.dll...m=2373845 946
I bought this setup from the same person, and has worked great for me and for 110 bucks it has worked great, and the 4 gal storage container generally gives me 3 gals in about 5 minutes which is perfect for me for topping off my 55gal. Hope this helps Christian "stephane" wrote in message ... I've been looking at RODI units lately for a new reef tank setup, and found the item listed below. Basically it's a 6 stage 100gpd unit for $110. Seems like it's too good to be true, but I don't know enough about these to tell if there's something fundamentally wrong with it. Can anyone offer more expert insight? TIA P.S. I hope my post isn't misconstrued as a feeble advertising attempt; I swear I'm not affilitated with seller/store, I'm just some guy trying not to get ripped off! http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=20 756 |
#4
|
|||
|
|||
![]()
The main issue is that this system is proprietary. It isn't using industry
standard sized products, so you will have to buy replacement filters and the DI cartridge from this vendor or any vendor that sells this setup. The industry standard is 10" filters, which can be obtained anywhere. And 110gpd membranes aren't common either. 100gpd is. Marc stephane wrote: I've been looking at RODI units lately for a new reef tank setup, and found the item listed below. Basically it's a 6 stage 100gpd unit for $110. Seems like it's too good to be true, but I don't know enough about these to tell if there's something fundamentally wrong with it. Can anyone offer more expert insight? TIA P.S. I hope my post isn't misconstrued as a feeble advertising attempt; I swear I'm not affilitated with seller/store, I'm just some guy trying not to get ripped off! http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=20 756 -- Personal Page: http://www.sparklingfloorservice.com/oanda/index.html Business Page: http://www.sparklingfloorservice.com Marine Hobbyist: http://www.melevsreef.com |
#5
|
|||
|
|||
![]()
Marc Levenson wrote in message ...
The main issue is that this system is proprietary. It isn't using industry standard sized products, so you will have to buy replacement filters and the DI cartridge from this vendor or any vendor that sells this setup. The industry standard is 10" filters, which can be obtained anywhere. And 110gpd membranes aren't common either. 100gpd is. Marc Actually the only thing that isn't standard is the di filters, the rest at least on the unit I got (not from this guy, but the one from Canada that sells on ebay) are standard. And the DI filters are cheaper even from them. $50 for 4. |
#6
|
|||
|
|||
![]()
They must not last long. I'm still using the same DI on my unit for 14 months.
Marc Brian Kramer wrote: Marc Levenson wrote in message ... The main issue is that this system is proprietary. It isn't using industry standard sized products, so you will have to buy replacement filters and the DI cartridge from this vendor or any vendor that sells this setup. The industry standard is 10" filters, which can be obtained anywhere. And 110gpd membranes aren't common either. 100gpd is. Marc Actually the only thing that isn't standard is the di filters, the rest at least on the unit I got (not from this guy, but the one from Canada that sells on ebay) are standard. And the DI filters are cheaper even from them. $50 for 4. -- Personal Page: http://www.sparklingfloorservice.com/oanda/index.html Business Page: http://www.sparklingfloorservice.com Marine Hobbyist: http://www.melevsreef.com |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Advice sought on using an RO unit | Spindoctor | Tech | 6 | June 29th 04 08:51 PM |
RO unit component replacement? | Richard Periut | Reefs | 8 | February 5th 04 03:48 AM |
Kent Maxxima RO/DI unit | reefman MC | Reefs | 6 | January 7th 04 12:48 AM |
How to catch a Camelback shrimp? | kim gross | Reefs | 6 | August 20th 03 02:48 AM |
RO/DI Unit Installation problem | Tim Gilder | Reefs | 3 | July 24th 03 03:38 AM |