![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
thinking of gettting one of these whats the problems. do they need a pump
on all the time like the old ones used to and are they good enough to plumb into the standard water supply Robin. |
#2
|
|||
|
|||
![]()
Robin Gordon wrote:
thinking of gettting one of these whats the problems. do they need a pump on all the time like the old ones used to Only if you have low water pressure. "on all the time" is a bit of an odd one, unless you were making water "all of the time". and are they good enough to plumb into the standard water supply Depends on your definition of "standard". Given the level of your questions, we can't possibly know enough about your situation to help you much, or as easily as your friendly local provider. Try the yellow pages, under water treatment. Sears, in the US, used to do water filtration, as I recall. They already know your local issues and can recommend a suitable system. You can, then, choose to buy something from them, or take the info and look elsewhere. |
#3
|
|||
|
|||
![]()
Robin Gordon wrote:
thinking of gettting one of these whats the problems. do they need a pump on all the time like the old ones used to Only if you have low water pressure. "on all the time" is a bit of an odd one, unless you were making water "all of the time". and are they good enough to plumb into the standard water supply Depends on your definition of "standard". Given the level of your questions, we can't possibly know enough about your situation to help you much, or as easily as your friendly local provider. Try the yellow pages, under water treatment. Sears, in the US, used to do water filtration, as I recall. They already know your local issues and can recommend a suitable system. You can, then, choose to buy something from them, or take the info and look elsewhere. **********End Of Post************* Try http://www.roultratec.com/company.asp I've had one of there 100gpd units for a few years, Great cus't service, great prices. I noticed the new ones have a booster pump but you may not need it , my water pressure is around 45psi right now and it works fine, No they don't run all the time, the residential units come with a faucet for the sink and a holding tank, when the holding (3gal I think) tank is full the unit shuts itself off.I also added a tee an a shut off so I could make water in the basement. |
#4
|
|||
|
|||
![]()
Please be more specific.
Below question are not to offend you but trying to figuring out what you are trying to say. Please do not get this the wrong way. When you indicate "These", what does this mean? What type of problem does it exhibiting? What type of pump are you referring to? Do you mean a booster pump? What is the model of the "old one"? What is "They" are you referring to? CapFusion,... "Robin Gordon" wrote in message ... thinking of gettting one of these whats the problems. do they need a pump on all the time like the old ones used to and are they good enough to plumb into the standard water supply Robin. |
#5
|
|||
|
|||
![]()
Hi Robin,
Just so you know, here's another unit for you to add to your list of choices. As you look over the pages, you'll see some things that perhaps will answer future questions as well. http://www.sparklingfloorservice.com/tank/ro_di.html http://www.melevsreef.com/rodi_install.html Marc Robin Gordon wrote: thinking of gettting one of these whats the problems. do they need a pump on all the time like the old ones used to and are they good enough to plumb into the standard water supply Robin. -- Personal Page: http://www.sparklingfloorservice.com/oanda/index.html Business Page: http://www.sparklingfloorservice.com Marine Hobbyist: http://www.melevsreef.com |
#6
|
|||
|
|||
![]()
You can buy a pressure gauge at Home Depot for about $8.00 that will screw
onto a garden hose type faucet. This will tell you if you need a pump. I think the minimum pressure on my RO unit is 40 psi and the max is 80. This will tell you if you need a pump. "Robin Gordon" wrote in message ... thinking of gettting one of these whats the problems. do they need a pump on all the time like the old ones used to and are they good enough to plumb into the standard water supply Robin. |
#7
|
|||
|
|||
![]() "PaulB" wrote in message m... You can buy a pressure gauge at Home Depot for about $8.00 that will screw onto a garden hose type faucet. This will tell you if you need a pump. I think the minimum pressure on my RO unit is 40 psi and the max is 80. This will tell you if you need a pump. That is interesting. I would not think of that. CapFusion,... |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Free C02 regulator | Ian Smith | Tech | 1 | June 8th 04 08:16 PM |
Condensation and RO Units. | Justin Boucher | Tech | 0 | February 9th 04 06:13 AM |
No Better RO/DI Anywhere!!! | Pat Hogan | General | 0 | November 14th 03 05:57 PM |