![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I intend to put stones or pebbles in my wildlife pond which won't have any
fish apart from maybe the odd stickleback. My preferred pebbles are limestone but I have seen a warning against using limestone pebbles because they can change the ph. Should I take this warning seriously? thanks, Davy |
#2
|
|||
|
|||
![]()
On Sun, 24 Sep 2006 11:20:55 +0100, "Davy"
wrote: I intend to put stones or pebbles in my wildlife pond which won't have any fish apart from maybe the odd stickleback. My preferred pebbles are limestone but I have seen a warning against using limestone pebbles because they can change the ph. Should I take this warning seriously? thanks, Davy Seriously? Yes. pH change problem, I don't think so. Limestone is mostly calcium carbonate and magnesium, for pond keeping purposes and I use it (ground garden limestone) to maintain KH, (AKA Total Alkalinity/Carbonate Hardness and probably other names, I can't recall at the moment.) or the stabilizer for pH. Limestone dissolves into the water as long as the pH is below 7.8, but once saturated to that point the limestone stops dissolving. I can't imagine that being a problem and no it won't cause a crash, but rather stabilize the pH so it doesn't get into wild swings and crash. My biggest problem with dissolving garden lime is it's being so slow in dissolving. After a heavy rain, usually acid, my pH remains stable, but the KH readings often drop to 1 degree or about 20ppm of calcium carbonate and 100 is recommended. I wish, but it doesn't happen for me, still the pH hasn't crashed in more than 10 years of using limestone to buffer the pH. I sometimes add baking soda, or sodium bicarbonate, the bicarbonates being the buffer, like calcium carbonates, or I can clench my teeth and wait until the limestone finally dissolves enough to bring the KH reading back up to a more acceptable level, and in my pond that is only about 40ppm, but it works and the fish thrive. Without it I would have to add sodium bicarbonate weekly to keep the pH stable. Regards, Hal |
#3
|
|||
|
|||
![]()
Davy wrote:
I intend to put stones or pebbles in my wildlife pond which won't have any fish apart from maybe the odd stickleback. My preferred pebbles are limestone but I have seen a warning against using limestone pebbles because they can change the ph. Should I take this warning seriously? Absolutely not. Limestone in its various forms _will_ move pH towards 8.4, which is not ideal for some plants or fish, _but_ it will stabilize the pH in that region, which is much better than having wild swings in the pH. -- derek |
#4
|
|||
|
|||
![]() "Davy" wrote in message ... I intend to put stones or pebbles in my wildlife pond which won't have any fish apart from maybe the odd stickleback. My preferred pebbles are limestone but I have seen a warning against using limestone pebbles because they can change the ph. Should I take this warning seriously? thanks, Davy ========================= They don't change the PH of my ponds and tanks. In fact I believe they keep the PH from dropping by acting as a buffer. -- KL.... Frugal ponding since 1995. My Pond & Aquarium Pages: http://tinyurl.com/9do58 ~~~~ }((((* ~~~ }{{{{(ö ~~~~ }((((({* |
#5
|
|||
|
|||
![]()
up here limestone quarries are home to many kinds of fish. they dissolve slowly, act
as a buffer and keep the pH nice and stable. dont use marble chips, however. Ingrid "Davy" wrote: I intend to put stones or pebbles in my wildlife pond which won't have any fish apart from maybe the odd stickleback. My preferred pebbles are limestone but I have seen a warning against using limestone pebbles because they can change the ph. Should I take this warning seriously? thanks, Davy ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List Manager: Puregold Goldfish List at http://weloveteaching.com/puregold/ sign up: http://groups.google.com/groups/dir?...s=Group+lookup www.drsolo.com Solve the problem, dont waste energy finding who's to blame ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I receive no compensation for running the Puregold list or Puregold website. I do not run nor receive any money from the ads at the old Puregold site. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Zone 5 next to Lake Michigan |
#6
|
|||
|
|||
![]()
Thanks guys for the informative answers. Seems I can, and should, use the
limestone chippings and worn pebbles. My only problem now is that the crushed chippings contain some very small sharp flakes which may harm the lining. I don't seem to be able to sieve these out since I cannot get the chippings dry enough - even a small amount of moisture makes the very small flakes stick to the larger pieces. Washing is not reliable for much the same reason. many thanks, Davy "Davy" wrote in message ... I intend to put stones or pebbles in my wildlife pond which won't have any fish apart from maybe the odd stickleback. My preferred pebbles are limestone but I have seen a warning against using limestone pebbles because they can change the ph. Should I take this warning seriously? thanks, Davy |
#7
|
|||
|
|||
![]()
On Mon, 25 Sep 2006 07:23:31 +0100, "Davy"
wrote: My only problem now is that the crushed chippings contain some very small sharp flakes which may harm the lining. I don't seem to be able to sieve these out since I cannot get the chippings dry enough - even a small amount of moisture makes the very small flakes stick to the larger pieces. Washing is not reliable for much the same reason. You could rent a cement mixer and tumble them for a few days. I don't know what liner you are using, but I have a 20 mil Permalon and a 40 mil rubber and wouldn't hesitate to use them in either pond, if that was my desire. I did in face keep river pebbles in the 40 mil rubber a couple years, but cleaning was such a problem I stopped doing that. Regards, Hal |
#8
|
|||
|
|||
![]()
see if anyone in the area has a cement mixer. put them in and tumble them for a
while, that should knock the edges off. If you have a small amount, then try putting them in a bowl and pouring muriatic acid into the bowl and wait. it will dissolve limestone chips first. then rinse well. "Davy" wrote: Thanks guys for the informative answers. Seems I can, and should, use the limestone chippings and worn pebbles. My only problem now is that the crushed chippings contain some very small sharp flakes which may harm the lining. I don't seem to be able to sieve these out since I cannot get the chippings dry enough - even a small amount of moisture makes the very small flakes stick to the larger pieces. Washing is not reliable for much the same reason. many thanks, Davy ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List Manager: Puregold Goldfish List at http://weloveteaching.com/puregold/ sign up: http://groups.google.com/groups/dir?...s=Group+lookup www.drsolo.com Solve the problem, dont waste energy finding who's to blame ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I receive no compensation for running the Puregold list or Puregold website. I do not run nor receive any money from the ads at the old Puregold site. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Zone 5 next to Lake Michigan |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Update on fish problems | humBill | General | 6 | April 13th 06 07:44 PM |
WATER SPANIEL problems | Lil ole me | General | 0 | February 17th 05 03:26 AM |
Do balloon mollies tend to have genetic problems? Dropsy? Help! | Jim | General | 1 | February 12th 05 06:14 PM |
Pebbles or Sand ? | 2pods | General | 20 | September 24th 04 07:11 PM |
Dolomitic Limestone | Bill Stock | Goldfish | 8 | July 25th 04 04:37 PM |