![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Looking for some help on a pump for an overflow. I'm going to be getting an
Eshopps 800gph overflow box for my 75 gallon tank with a Eshopps 125 Advance refugium. Anyways I'm currently using a 600 gph pump on the set up I have now (overflow with a sump). This may be a silly question but can I use the same pump for the new set up or do I need to get a higher rated one? I believe the current overflow box I'm using is rated for 600 gph and the new one will be rated for 800 gph. Any help is appreciated ![]() TIA, Susan ![]() |
#2
|
|||
|
|||
![]()
On Jan 10, 12:38*am, "Susan" wrote:
Looking for some help on a pump for an overflow. *I'm going to be getting an Eshopps 800gph overflow box for my 75 gallon tank with a Eshopps 125 Advance refugium. *Anyways I'm currently using a 600 gph pump on the set up I have now (overflow with a sump). *This may be a silly question but can I use the same pump for the new set up or do I need to get a higher rated one? *I believe the current overflow box I'm using is rated for 600 gph and the new one will be rated for 800 gph. *Any help is appreciated ![]() TIA, Susan ![]() What.you mean your getting pumped so hard your box overflows...dam, that stud must be well hung and have quiet a pair huh? |
#3
|
|||
|
|||
![]()
Susan wrote:
This may be a silly question but can I use the same pump for the new set up or do I need to get a higher rated one? I believe the current overflow box I'm using is rated for 600 gph and the new one will be rated for 800 gph. You can use the same pump as anything below 800 gph will work fine. --Kurt |
#4
|
|||
|
|||
![]()
Much appreciated for the help Kurt!! Glad I can save some $$ and reuse the
pump. Susan ![]() "KurtG" wrote in message . .. Susan wrote: This may be a silly question but can I use the same pump for the new set up or do I need to get a higher rated one? I believe the current overflow box I'm using is rated for 600 gph and the new one will be rated for 800 gph. You can use the same pump as anything below 800 gph will work fine. --Kurt |
#5
|
|||
|
|||
![]()
On Jan 10, 9:06*am, "Big Habeeb (a.k.a. Mitch)"
wrote: On Jan 10, 12:38*am, "Susan" wrote: Looking for some help on a pump for an overflow. *I'm going to be getting an Eshopps 800gph overflow box for my 75 gallon tank with a Eshopps 125 Advance refugium. *Anyways I'm currently using a 600 gph pump on the set up I have now (overflow with a sump). *This may be a silly question but can I use the same pump for the new set up or do I need to get a higher rated one? *I believe the current overflow box I'm using is rated for 600 gph and the new one will be rated for 800 gph. *Any help is appreciated ![]() TIA, Susan ![]() What.you mean your getting pumped so hard your box overflows...dam, that stud must be well hung *and have quiet a pair huh? |
#6
|
|||
|
|||
![]()
Susan wrote:
Much appreciated for the help Kurt!! Glad I can save some $$ and reuse the pump. NP. |
#7
|
|||
|
|||
![]()
On Jan 10, 1:21*pm, "Big Habeeb (a.k.a. Mitch)"
wrote: On Jan 10, 9:06*am, "Big Habeeb (a.k.a. Mitch)" wrote: On Jan 10, 12:38*am, "Susan" wrote: Looking for some help on a pump for an overflow. *I'm going to be getting an Eshopps 800gph overflow box for my 75 gallon tank with a Eshopps 125 Advance refugium. *Anyways I'm currently using a 600 gph pump on the set up I have now (overflow with a sump). *This may be a silly question but can I use the same pump for the new set up or do I need to get a higher rated one? *I believe the current overflow box I'm using is rated for 600 gph and the new one will be rated for 800 gph. *Any help is appreciated ![]() TIA, Susan ![]() What.you mean your getting pumped so hard your box overflows...dam, that stud must be well hung *and have quiet a pair huh?- Hide quoted text - - Show quoted text - |
#8
|
|||
|
|||
![]()
On Jan 10, 1:21*pm, "Big Habeeb (a.k.a. Mitch)"
wrote: On Jan 10, 9:06*am, "Big Habeeb (a.k.a. Mitch)" wrote: On Jan 10, 12:38*am, "Susan" wrote: Looking for some help to keep my box from overflowing. * *Anyways I'm currently screwing close to 600 guys daily on the set up I have now (overflow with a sump). *This may be a silly question but can I use the same pump for the new set up or do I need to get a higher rated one? *I believe the current overflow box I'm using is rated for 600 gph and the new one will be rated for 800 gph. *Any help is appreciated ![]() TIA, Susan ![]() What.you mean your getting pumped so hard your box overflows...dam, that stud must be well hung *and have quiet a pair huh?- Hide quoted text - - Show quoted text - |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pump size | [email protected] | General (alternative) | 0 | December 19th 07 01:26 PM |
Drain Size & Pump Size | [email protected] | Reefs | 1 | April 18th 06 06:13 AM |
What size pump??? | GoldLexus | General | 3 | June 16th 04 05:30 PM |
AGA overflow and return pump | Toni | Reefs | 5 | November 22nd 03 08:48 PM |
Return pump size | [email protected] | Reefs | 1 | September 11th 03 02:34 AM |