![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
My nitrates run normally 10 - 15 ppm. I do 1/3 partial water changes
roughly every 25 - 30 days. Today I checked my levels and I'm at 20 ppm. This is just after i did my Partial WC Other then water changes how can I reduce my nitrates. I've tried in the past adding macro algae, but the bristle star fish also found it and made a meal out of it, so that didn't work. My tank: 75 gal FOWLR 4" DSB 85 lbs LR Canister filtration, Protein skimmer. Thanks |
#2
|
|||
|
|||
![]()
Brittle stars don't eat macroalgae.
Your canister filter is contributing to your nitrates. You could convert it into a denitrier by restricting the output. Wayne Sallee Peter Pan wrote on 1/24/2008 9:50 PM: My nitrates run normally 10 - 15 ppm. I do 1/3 partial water changes roughly every 25 - 30 days. Today I checked my levels and I'm at 20 ppm. This is just after i did my Partial WC Other then water changes how can I reduce my nitrates. I've tried in the past adding macro algae, but the bristle star fish also found it and made a meal out of it, so that didn't work. My tank: 75 gal FOWLR 4" DSB 85 lbs LR Canister filtration, Protein skimmer. Thanks |
#3
|
|||
|
|||
![]() Your canister filter is contributing to your nitrates. You could convert it into a denitrier by restricting the output. Can you elaborate on this? I'm not sure what you mean |
#4
|
|||
|
|||
![]()
Nitrification is the process that takes place with
plenty of oxygen. Ammonia is oxidized into nitrite, and then oxidized into nitrate. Denitrification is the process that takes place in low oxygen. Nitrates is reduced to nitrites, and then reduced to N2. By restricting the flow of the output of the canister filter, oxygen levels in the canister filter will drop, and denitrification will take place. Wayne Sallee Peter Pan wrote on 1/24/2008 11:34 PM: Your canister filter is contributing to your nitrates. You could convert it into a denitrier by restricting the output. Can you elaborate on this? I'm not sure what you mean |
#5
|
|||
|
|||
![]() So to restrict the flow, simply turn the valve on the hose returning to the tank to decrease the output? |
#6
|
|||
|
|||
![]()
Peter Pan wrote:
So to restrict the flow, simply turn the valve on the hose returning to the tank to decrease the output? Recommend a drip gate for this, but you'll need to check it every few days to make sure the drip is right. Here's where I get mine: http://tinyurl.com/33na84 Might as well load up on flea meds while you're there. ;-) I'd also recommend a tank starter. I added this stuff to my tank and my nitrates went to zero in 30 days. It's supposed to have all the various bacteria. I recommended to a friend with fresh water tanks and nitrate issues and her nitrates went to zero in a month. I suspect it works. If interested, I'll post the name. (I'm at work now). --Kurt |
#7
|
|||
|
|||
![]()
Yep, I would also put a T on the input and the
output and connect them with a valve. That way, when you restrict the output, the water will still flow full flow through the filer, circulating in and out of the filter. Since bacteria is able to process more water the more the water flows across it. Also the warmth of the motor will help warm the water up in the filter thus speeding up the denitrification. Just make sure it does not get too hot. And you can drip the output over a flat object to aerate it to degas any hydrogen sulfide. Wayne Sallee Peter Pan wrote on 1/25/2008 9:27 AM: So to restrict the flow, simply turn the valve on the hose returning to the tank to decrease the output? |
#8
|
|||
|
|||
![]() "Peter Pan" wrote in message . .. My nitrates run normally 10 - 15 ppm. I do 1/3 partial water changes roughly every 25 - 30 days. Today I checked my levels and I'm at 20 ppm. This is just after i did my Partial WC Other then water changes how can I reduce my nitrates. I've tried in the past adding macro algae, but the bristle star fish also found it and made a meal out of it, so that didn't work. My tank: 75 gal FOWLR 4" DSB 85 lbs LR Canister filtration, Protein skimmer. Thanks PP: I've got the same setup with my 45 gal tank. On recommendation from someone in this group I added LR to my 45 gal. (There must be at least 140 lbs of LR) The results have been good. I'd say I'm changing my water now about half of what I was changing it. About 5 gal a week. If my nitrates are elevated I'll skip feeding my fish for a night and check it again in the morning. Usually the nitrates will be lower. The LR seems to be doing the trick. Jim |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
using co2 to lower ph | [email protected] | General | 10 | February 13th 06 01:08 PM |
Do plants lower the pH? | Liz | Plants | 4 | November 19th 05 07:14 PM |
How to lower ph | Jim and Phyllis Hurley | General | 6 | July 30th 04 02:16 AM |
How do I lower Ph? | KRF | General (alternative) | 4 | May 9th 04 05:09 AM |
How do I lower my PH? | KRF | General | 12 | April 12th 04 02:09 PM |