![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#7
|
|||
|
|||
![]() you can also measure O2, and know that O2 is consumed which increases CO2 If you have assumed that the CO2 is up because the Ph is down then I'm not sure that's what's going on. I tested the Kh of the water coming out my de-nitrator and it is markedly lower than the Kh of the water in the tank. That would have a side effect of lowering Ph as well (without needing an increased CO2 level to do it). IF Kh is unchanged and PH is changed then CO2 has changed, True, but as per my previous post KH is changing in my filter did I assume kinda, but only kinda this is how a coil works, yours i have no idea, i can kinda guess from what your saying, and maybee something is consumed the sulphur maybee?? along with Kh, or maybee the sulphur alone will lower Kh Not sure but dropping Ph seems to be a generic issue with de-nitrators - I wonder in fact if that is a mis-nomer & it is a secondary effect of dropping Kh. If you have a coil running now I'd be interested to know if there is a variation between the Kh in your tank & that coming out the coil. rgds I. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
titanium cooling coil | JG | Tech | 7 | August 7th 03 09:54 PM |
titanium cooling coil | JG | General | 7 | August 7th 03 09:54 PM |
DIY Coil Denitrator Questions | Kveill | General | 11 | August 2nd 03 01:53 AM |
DIY Coil Denitrator Questions | Kveill | Tech | 11 | August 2nd 03 01:53 AM |
DIY Coil Denitrator Questions | Kveill | General | 11 | August 2nd 03 01:53 AM |