Pump enclosure ideas?

I would try to set it up with the priming pot outside the enclosure. The
pump needs to be protected from the rain, but doesn't require
daily/weekly/monthly service. The priming pot has a strainer in it that
catches debris to keep it from fouling the pump, and this must be cleaned
when necessary.
--
RichToyBox
http://www.geocities.com/richtoybox/pondintro.html


"ttalbls" wrote in message
news:vaO9c.123633$po.830361@attbi_s52...
I have a Sequence external pump that is going to be below ground level.
There is a Sequence priming pot on the intake side and I have rotated the
disharge so it exits parallel to the gound. A couple of questions:

What type of boxes or enclosures are people using?
Should the priming pot be inside or outside of the pump box?

Any hints/tips/tricks would be greatl appreciated.

Thanks