![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#2
|
|||
|
|||
![]()
We have a 210 GPH pump but we don't actually have a filter. I did place a
soft foam block over the intake and I clean it weekly -- it picks up a lot of stuff. The water just goes up to the waterfall and back in. Pretty elementary, I know. To really know if your situation is working you would need a test kit for at least ammonia & nitrite, the next 2 test kits I consider important are pH & KH plus a thermometer. Do I need a skippy filter or something? No, nothing that drastic, but a flower pot filter would be perfect. You can see 2 versions on my website by clicking *My Filter* and scrolling to the bottom of the page, the one on the left is a factory made by Tetra, the one on the right is homemade. I recently made my own for my lily pond, cost under $15, not counting media, which can be cheap vinyl coated window screening. On page 7, bottom right, of *My pond photos* is a recommended way to encase your pump, instead of dealing with that little prefilter foam you're cleaning weekly. Encasing it with mesh (do not leave the foam on) will make it so you won't have to disturb the pump, and residents, in the pond at all. I thought I was good with the plants and doing the water changes once a month. You obviously have been, but your fish are growing and you want to prevent "Critical Mass". That's when things go sour, fish get sick, half die while you try to get things back to right again. This is where the test kits come in. I highly recommend the tests kits from Aquarium Pharmaceuticals, Inc., very easy to use, and reasonably priced. So far the cheapest place to purchase is thru www.thatpetplace.com Sometimes you can find them at a pet store, if so, open the box, one of the bottles will have a manufacturing date on the front label at the top. You want that date to be no later than 1/04, though they claim they're good for 2 years. The KHA program recommends getting fresh kits every year. ~ jan See my ponds and filter design: http://users.owt.com/jjspond/ ~Keep 'em Wet!~ Tri-Cities WA Zone 7a To e-mail see website |
#3
|
|||
|
|||
![]()
On 7/5/04 5:42 PM, in article
, "~ jan JJsPond.us" wrote: We have a 210 GPH pump but we don't actually have a filter. I did place a soft foam block over the intake and I clean it weekly -- it picks up a lot of stuff. The water just goes up to the waterfall and back in. Pretty elementary, I know. To really know if your situation is working you would need a test kit for at least ammonia & nitrite, the next 2 test kits I consider important are pH & KH plus a thermometer. Do I need a skippy filter or something? No, nothing that drastic, but a flower pot filter would be perfect. You can see 2 versions on my website by clicking *My Filter* and scrolling to the bottom of the page, the one on the left is a factory made by Tetra, the one on the right is homemade. I recently made my own for my lily pond, cost under $15, not counting media, which can be cheap vinyl coated window screening. On page 7, bottom right, of *My pond photos* is a recommended way to encase your pump, instead of dealing with that little prefilter foam you're cleaning weekly. Encasing it with mesh (do not leave the foam on) will make it so you won't have to disturb the pump, and residents, in the pond at all. I thought I was good with the plants and doing the water changes once a month. You obviously have been, but your fish are growing and you want to prevent "Critical Mass". That's when things go sour, fish get sick, half die while you try to get things back to right again. This is where the test kits come in. I highly recommend the tests kits from Aquarium Pharmaceuticals, Inc., very easy to use, and reasonably priced. So far the cheapest place to purchase is thru www.thatpetplace.com Sometimes you can find them at a pet store, if so, open the box, one of the bottles will have a manufacturing date on the front label at the top. You want that date to be no later than 1/04, though they claim they're good for 2 years. The KHA program recommends getting fresh kits every year. ~ jan See my ponds and filter design: http://users.owt.com/jjspond/ ~Keep 'em Wet!~ Tri-Cities WA Zone 7a To e-mail see website Thank you, Jan, for such a thorough response! I have my work cut out for me. I think they have the test kits at a local pet supply -- I've looked at them, but didn't know what to buy. Now I do! I get to working on a filter solution next. Thank you again! You guys are so nice! Angie -- newest member of the PORG collective |
#4
|
|||
|
|||
![]() Hi Angie, welcome to rec.ponds! kathy :-) algae primer http://hometown.aol.com/ka30p/myhomepage/garden.html |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
newbie - Is RO water really necessary? | Veggie | General | 3 | December 11th 06 06:24 PM |
How long will live sand live in a bucket? + other newbie questions | WOW | Reefs | 1 | April 26th 04 04:36 AM |
More Newbie Questions | Mike | Reefs | 6 | March 28th 04 08:24 AM |
Planting density & driftwood, lighting (Newbie) | JHudson | Plants | 5 | November 20th 03 01:42 PM |
Newbie Help............ | jason | General | 7 | September 28th 03 09:04 PM |