A Fishkeeping forum. FishKeepingBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » FishKeepingBanter.com forum » ponds » General
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Advice Needed



 
 
Thread Tools Display Modes
  #1  
Old August 18th 04, 03:19 PM
mostyn30
external usenet poster
 
Posts: n/a
Default

Hi All
Thanks for the responses, right here go's
the size of the pond is 12ftx12ftx3ft I have already constructed it and is
too late to put in a sump drain.
I was thinking of an external pump with suction pipe in one end and a return
pipe into the other to make a contraflow/vortex then a small 500 hoselock
pump to run my waterfall both systems running through a separate UV lights
but the main pump running through a filter as well.
let me know what you think to this idea.
to see the location of my pond to buildings and soforth check out my site
but it's not upto date it was last updated last September and a lot has been
done since then, I will update my site after the whole garden is finished.
take a look and let me know your views please.
yours Mostyn
www.mostynpondlife.com

"~ jan JJsPond.us" wrote in message
...
1/ A pump that sits on the bottom of the pond and pipes going upto a

filer
and returns back.


2/ Or a pump that sits in a pump house out side the pond and pipes run

from
the pond through the pump then into a filter & uv light & back to the

pond.
Mostyn


#1 works for a small, light stocked water garden, BV mentioned the
potential problem of draining the pond. There are automatic shut offs
available. (Mercury Flow Switches)

#2 is better for bigger system, but still not ideal, imo. Better is to

have
the pump after the filter, less wear and tear on the pump and muck isn't
ground up into tiny bits that can by-pass the filter.

As far as pumps, external pumps are more efficient as they give more gph
using less energy, but a submersible can still be used in an out-of-pond
filtration unit. I have this type of system diagrammed on my website, with
plumbing added after the pond was been in and plumbing correctly when put
in at the same time as the pond. See *My Filter* *Demon Pond Filter* &
*Lily Pond* with the last set showing what the plumbing looks like under
the pond. There are of course all sorts of variations.

My lily pond at this time has set up #1 until we put in (read: have money)
the out of pond filter & pump. ~ jan
~Power to the Porg, Flow On!~



  #2  
Old August 19th 04, 10:13 PM
~ jan JJsPond.us
external usenet poster
 
Posts: n/a
Default

Sounds like a plan to me. ) ~ jan

On Wed, 18 Aug 2004 14:19:08 GMT, "mostyn30" wrote:


Hi All
Thanks for the responses, right here go's
the size of the pond is 12ftx12ftx3ft I have already constructed it and is
too late to put in a sump drain.
I was thinking of an external pump with suction pipe in one end and a return
pipe into the other to make a contraflow/vortex then a small 500 hoselock
pump to run my waterfall both systems running through a separate UV lights
but the main pump running through a filter as well.
let me know what you think to this idea.
to see the location of my pond to buildings and soforth check out my site
but it's not upto date it was last updated last September and a lot has been
done since then, I will update my site after the whole garden is finished.
take a look and let me know your views please.
yours Mostyn
www.mostynpondlife.com

"~ jan JJsPond.us" wrote in message
.. .
1/ A pump that sits on the bottom of the pond and pipes going upto a

filer
and returns back.


2/ Or a pump that sits in a pump house out side the pond and pipes run

from
the pond through the pump then into a filter & uv light & back to the

pond.
Mostyn


#1 works for a small, light stocked water garden, BV mentioned the
potential problem of draining the pond. There are automatic shut offs
available. (Mercury Flow Switches)

#2 is better for bigger system, but still not ideal, imo. Better is to

have
the pump after the filter, less wear and tear on the pump and muck isn't
ground up into tiny bits that can by-pass the filter.

As far as pumps, external pumps are more efficient as they give more gph
using less energy, but a submersible can still be used in an out-of-pond
filtration unit. I have this type of system diagrammed on my website, with
plumbing added after the pond was been in and plumbing correctly when put
in at the same time as the pond. See *My Filter* *Demon Pond Filter* &
*Lily Pond* with the last set showing what the plumbing looks like under
the pond. There are of course all sorts of variations.

My lily pond at this time has set up #1 until we put in (read: have money)
the out of pond filter & pump. ~ jan
~Power to the Porg, Flow On!~



~Power to the Porg, Flow On!~
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Advice needed - pond PH too high, my koi died KarenZ General 4 June 24th 04 02:44 PM
New to saltware, a bit of advice needed Steve \Srfmon\ Reefs 1 September 18th 03 06:04 AM
Advice needed for new aquarium with potting soil substrate and dying fish Michael Plants 8 August 26th 03 05:35 PM
Livebearer Advice needed Something's Fishy General 2 July 18th 03 07:49 PM


All times are GMT +1. The time now is 02:08 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 FishKeepingBanter.com.
The comments are property of their posters.