![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Okay, I posted on 5/17 regarding an electric timer for our pump to shut it
down at night (below is the full post). I have more information on the pump now that we have drained the pond. According to the label on the pump it is a Gould Pump, Model WS0511BF, 1/2 hp, 115 volts, max amp. 14.6, RPM 1750. Here is a link to a .pdf on the pump with all the GPH & Header info. (Greek to me) http://www.pumpshop.com/pdf/B3887.pdf (side note the previous owner of our home and the one how built the pond/waterfall is a General Contractor specializing in under ground utilities water and sewer) I am thinking we may replace the pump next season, finances don't allow us to now maybe they will we will see what you all suggest. Anyway, what would be a good replacement pump? We are NOT diy'ers so we will have to hire someone to put it in for us, what should we expect to pay someone for installation? Where would we go to find someone to install? Also, again here is a link to pics. of our pond for reference http://public.fotki.com/Nikkiekoala/our_garden/ Thanks for all your help. This is a great group for learning and ideas!!!! *****Post from 5/17******* ELECRIC TIMER We have pond with a waterfall. The water fall is at a 14 ft. incline with a submersible pump. We run the waterfall only during the spring and summer and shut it off in the fall/winter. We haven't turned it on yet this season due to some leaking issues. Anyway when the fall is running our electric bill triples! We run it 24/7 but we would like to shut it off during the night. Where can I get a timer for this purpose? Would it hurt the pump turning it on and off everyday? It is a big pump and runs on I believe 220 power. Sorry, I don't know much about this we 'inherited' the pond/waterfall when we bought the house and no very little about it. Last year was our first year with it and it was very expensive to run. Just need to find out how we can lower our electric bill thought a timer would help a bit |
#2
|
|||
|
|||
![]() Goulds certainly do make good pumps. In fact, they are industrial grade. The one you are talking about below will produce 120 gpm at a head of ten feet (7200 gph), which is quite strong. The questions I would ask about this pump is the electrical usage, and the amount of heat it would generate. Looking at the pictures of your pond, below, it doesn't look like the pond is very deep (what is the depth?). Another fact is price. Goulds pumps tend to be pricey because they are, after all, designed for industrial use. Have you looked at a flotec pump? Here is a link to their web site. They have a stainless steel pump designed specifically for waterfalls: http://www.flotecpump.com/asp/Product.asp?PId=283 It doesn't have quite the output (4100 gph) that the goulds model has, but it should be less expensive to purchase and run. "GoldLexus" wrote in message ... Okay, I posted on 5/17 regarding an electric timer for our pump to shut it down at night (below is the full post). I have more information on the pump now that we have drained the pond. According to the label on the pump it is a Gould Pump, Model WS0511BF, 1/2 hp, 115 volts, max amp. 14.6, RPM 1750. Here is a link to a .pdf on the pump with all the GPH & Header info. (Greek to me) http://www.pumpshop.com/pdf/B3887.pdf (side note the previous owner of our home and the one how built the pond/waterfall is a General Contractor specializing in under ground utilities water and sewer) I am thinking we may replace the pump next season, finances don't allow us to now maybe they will we will see what you all suggest. Anyway, what would be a good replacement pump? We are NOT diy'ers so we will have to hire someone to put it in for us, what should we expect to pay someone for installation? Where would we go to find someone to install? Also, again here is a link to pics. of our pond for reference http://public.fotki.com/Nikkiekoala/our_garden/ Thanks for all your help. This is a great group for learning and ideas!!!! *****Post from 5/17******* ELECRIC TIMER We have pond with a waterfall. The water fall is at a 14 ft. incline with a submersible pump. We run the waterfall only during the spring and summer and shut it off in the fall/winter. We haven't turned it on yet this season due to some leaking issues. Anyway when the fall is running our electric bill triples! We run it 24/7 but we would like to shut it off during the night. Where can I get a timer for this purpose? Would it hurt the pump turning it on and off everyday? It is a big pump and runs on I believe 220 power. Sorry, I don't know much about this we 'inherited' the pond/waterfall when we bought the house and no very little about it. Last year was our first year with it and it was very expensive to run. Just need to find out how we can lower our electric bill thought a timer would help a bit |
#3
|
|||
|
|||
![]()
Because of the electric use we are not interested in getting another Gould
pump. It is industrial grade and cost the previous owner a pretty penny even with the contractors discount! I have to give you a guesstimate on the depth, my guess would be about 3 ft. in the center. The pond is approx. 1000 gallons. The previous owner designed the pond to where we can turn a valve to close off the waterfall and re-route the water to another pipe for draining. It takes about 10-15 minutes to drain the entire pond. Which seems kind of fast. The pond was only about a third full last night when we drained it, it took 2 min. We had 3 goldfish, after draining we found only 1, while cleaning (shop vac) we found another in a puddle never found the third ![]() pump can't tell if there is a screen on it or not. Got too dark to see if there is a screen or not. Could check the filter and see if the fish is there but our filter is a big pain in th *ss to take apart and put together and not have any leaking. Sorry for the rambling.... the pond is on my mind now as we are in process of getting it going again. Will fill it today and start it up. ![]() " George" wrote in message .. . Goulds certainly do make good pumps. In fact, they are industrial grade. The one you are talking about below will produce 120 gpm at a head of ten feet (7200 gph), which is quite strong. The questions I would ask about this pump is the electrical usage, and the amount of heat it would generate. Looking at the pictures of your pond, below, it doesn't look like the pond is very deep (what is the depth?). Another fact is price. Goulds pumps tend to be pricey because they are, after all, designed for industrial use. Have you looked at a flotec pump? Here is a link to their web site. They have a stainless steel pump designed specifically for waterfalls: http://www.flotecpump.com/asp/Product.asp?PId=283 It doesn't have quite the output (4100 gph) that the goulds model has, but it should be less expensive to purchase and run. "GoldLexus" wrote in message ... Okay, I posted on 5/17 regarding an electric timer for our pump to shut it down at night (below is the full post). I have more information on the pump now that we have drained the pond. According to the label on the pump it is a Gould Pump, Model WS0511BF, 1/2 hp, 115 volts, max amp. 14.6, RPM 1750. Here is a link to a .pdf on the pump with all the GPH & Header info. (Greek to me) http://www.pumpshop.com/pdf/B3887.pdf (side note the previous owner of our home and the one how built the pond/waterfall is a General Contractor specializing in under ground utilities water and sewer) I am thinking we may replace the pump next season, finances don't allow us to now maybe they will we will see what you all suggest. Anyway, what would be a good replacement pump? We are NOT diy'ers so we will have to hire someone to put it in for us, what should we expect to pay someone for installation? Where would we go to find someone to install? Also, again here is a link to pics. of our pond for reference http://public.fotki.com/Nikkiekoala/our_garden/ Thanks for all your help. This is a great group for learning and ideas!!!! *****Post from 5/17******* ELECRIC TIMER We have pond with a waterfall. The water fall is at a 14 ft. incline with a submersible pump. We run the waterfall only during the spring and summer and shut it off in the fall/winter. We haven't turned it on yet this season due to some leaking issues. Anyway when the fall is running our electric bill triples! We run it 24/7 but we would like to shut it off during the night. Where can I get a timer for this purpose? Would it hurt the pump turning it on and off everyday? It is a big pump and runs on I believe 220 power. Sorry, I don't know much about this we 'inherited' the pond/waterfall when we bought the house and no very little about it. Last year was our first year with it and it was very expensive to run. Just need to find out how we can lower our electric bill thought a timer would help a bit |
#4
|
|||
|
|||
![]()
Are you still considering putting in a timer?
Construction supply should have a timer capable of that task. Nearly all businesses use mechanical timers to control their neon signs. I don't recall the rating on one. You could call and ask for the rating. In dental office, we shut off the vacuum pump every day. Not a problem so far. The motors on the air compressor cycle frequently, since dental office use a lot of air. They haven't break. GoldLexus wrote: Okay, I posted on 5/17 regarding an electric timer for our pump to shut it down at night (below is the full post). I have more information on the pump now that we have drained the pond. According to the label on the pump it is a Gould Pump, Model WS0511BF, 1/2 hp, 115 volts, max amp. 14.6, RPM 1750. Here is a link to a .pdf on the pump with all the GPH & Header info. (Greek to me) http://www.pumpshop.com/pdf/B3887.pdf (side note the previous owner of our home and the one how built the pond/waterfall is a General Contractor specializing in under ground utilities water and sewer) I am thinking we may replace the pump next season, finances don't allow us to now maybe they will we will see what you all suggest. Anyway, what would be a good replacement pump? We are NOT diy'ers so we will have to hire someone to put it in for us, what should we expect to pay someone for installation? Where would we go to find someone to install? Also, again here is a link to pics. of our pond for reference http://public.fotki.com/Nikkiekoala/our_garden/ Thanks for all your help. This is a great group for learning and ideas!!!! *****Post from 5/17******* ELECRIC TIMER We have pond with a waterfall. The water fall is at a 14 ft. incline with a submersible pump. We run the waterfall only during the spring and summer and shut it off in the fall/winter. We haven't turned it on yet this season due to some leaking issues. Anyway when the fall is running our electric bill triples! We run it 24/7 but we would like to shut it off during the night. Where can I get a timer for this purpose? Would it hurt the pump turning it on and off everyday? It is a big pump and runs on I believe 220 power. Sorry, I don't know much about this we 'inherited' the pond/waterfall when we bought the house and no very little about it. Last year was our first year with it and it was very expensive to run. Just need to find out how we can lower our electric bill thought a timer would help a bit |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
help choosing pump size | mark | General | 2 | May 20th 04 06:09 PM |
Have you ever measured real water pump output flow rate? | Pszemol | Reefs | 26 | January 19th 04 04:33 AM |
Pond Pump Size Question | Steve Shapson | General | 3 | December 29th 03 08:05 PM |
Return pump size | [email protected] | Reefs | 1 | September 11th 03 02:34 AM |
Pump Confusion | RROLD1 | General | 15 | August 28th 03 05:16 AM |