A Fishkeeping forum. FishKeepingBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » FishKeepingBanter.com forum » ponds » General
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

how much is too much...?!



 
 
Thread Tools Display Modes
  #1  
Old August 2nd 04, 08:25 PM
John
external usenet poster
 
Posts: n/a
Default how much is too much...?!

hey everyone. ive been working on my pumps and filtration methods. i used
to pump about 8 gallons a minute through a somewhat thick filter material
and within a week my pond was pretty clear. at the time the filtered water
went directly into the pond from the filter material. now, i have about
10-15 gallons per minute cascading down a waterfall and the top is filled
with hyacinth. there is no filter material now... when i use filter
material (even with the old set up) i was cleaning the material almost
everyday. i havnt had to change it all now with the hyacinth as my filters,
but the pond is completely green now. what should i be doing in order to not
be cleaning my filters everyday and get my pond back to being clean. The
filer is about 1 foot off the bottom of the pond so it doesnt pick up any
muck.. is this correct? any help is appreciated
thanx!
John


  #2  
Old August 4th 04, 07:20 AM
~ jan JJsPond.us
external usenet poster
 
Posts: n/a
Default how much is too much...?!

Probably not what you want to hear, but I'd get the filter and the pump out
of the pond, per my filter on my website, of course. ;o) ~ jan


See my ponds and filter design:
http://users.owt.com/jjspond/

~Keep 'em Wet!~
Tri-Cities WA Zone 7a
To e-mail see website


On Mon, 02 Aug 2004 19:25:07 GMT, "John" wrote:


hey everyone. ive been working on my pumps and filtration methods. i used
to pump about 8 gallons a minute through a somewhat thick filter material
and within a week my pond was pretty clear. at the time the filtered water
went directly into the pond from the filter material. now, i have about
10-15 gallons per minute cascading down a waterfall and the top is filled
with hyacinth. there is no filter material now... when i use filter
material (even with the old set up) i was cleaning the material almost
everyday. i havnt had to change it all now with the hyacinth as my filters,
but the pond is completely green now. what should i be doing in order to not
be cleaning my filters everyday and get my pond back to being clean. The
filer is about 1 foot off the bottom of the pond so it doesnt pick up any
muck.. is this correct? any help is appreciated
thanx!
John


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 04:32 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 FishKeepingBanter.com.
The comments are property of their posters.