![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]() I removed all my mechanical filtration and bio-balls. That was a great suggestion as my skimmer is now picking up 2-3x the debris as before. Problem is that now the skimmer reeks bad! Putrid bad! I was emptying it once a day, and started twice a day. Problem is that by it's very design, it has air flowing through it and the aroma isn't the most appealing for living room. (Of course, I've opened the windows now due to nicer weather.) Any ideas? I can hope that this will settle down eventually. --Kurt |
#2
|
|||
|
|||
![]() Can it be run a abit more onthe drier side? It would increase time between having to empty the collection cups. I screwed up on mine the other night. I dosed some B-Ionic, and also swirled in a good heavy feeding of silversides and home brew frozen foods........I forgot to turn off skimmer, and walked off and went out to the shop. came back in an my tank was a mass of bubbles and ppaque looking water......Iknew imediately what was wrong. It had so much air mixed inthe tanks water from the level being low, is what made it opaque, and what was not in the tank was on the floor / carpet.......Wife liked tohave had a fit, when she came out and walked over to he tank and got damp feet ;-) At least the skimmer was cleaned about 1 hour earlier so no real nasty stuff got spilled out of it. On Fri, 02 Feb 2007 14:47:45 -0500, KurtG wrote: I removed all my mechanical filtration and bio-balls. That was a great suggestion as my skimmer is now picking up 2-3x the debris as before. Problem is that now the skimmer reeks bad! Putrid bad! I was emptying it once a day, and started twice a day. Problem is that by it's very design, it has air flowing through it and the aroma isn't the most appealing for living room. (Of course, I've opened the windows now due to nicer weather.) Any ideas? I can hope that this will settle down eventually. --Kurt ------- I forgot more about ponds and koi than I'll ever know! |
#3
|
|||
|
|||
![]() "KurtG" wrote in message ... I removed all my mechanical filtration and bio-balls. That was a great suggestion as my skimmer is now picking up 2-3x the debris as before. Problem is that now the skimmer reeks bad! Putrid bad! I was emptying it once a day, and started twice a day. Problem is that by it's very design, it has air flowing through it and the aroma isn't the most appealing for living room. (Of course, I've opened the windows now due to nicer weather.) Any ideas? I can hope that this will settle down eventually. --Kurt Put a small tad of kalk powder in their as it helps the smell. I don't know exactly how but it does. It may have something to do with the bacteria production or enzymes in the skimmate.I add just a small bit with a little water and it helped mine.Just clean up the residue it leaves once in awhile with vinegar and water mix. Lay a carbon bag over the holes if any in the top is another method I have heard |
#4
|
|||
|
|||
![]()
KurtG wrote:
I removed all my mechanical filtration and bio-balls. That was a great suggestion as my skimmer is now picking up 2-3x the debris as before. Problem is that now the skimmer reeks bad! Putrid bad! I was emptying it once a day, and started twice a day. Problem is that by it's very design, it has air flowing through it and the aroma isn't the most appealing for living room. (Of course, I've opened the windows now due to nicer weather.) Any ideas? I can hope that this will settle down eventually. --Kurt It should settle down. Tristan's suggestion about adjusting water level or airflow to produce drier foam is the first thing I'd reccomend you try. It may also clear up if given enough time. on it's own. The skimmate that collects in my cups has sort of a mildly earthy smell to it - if it smells like rotting seaweed, low tide, or the like, something is wrong. The liquid that collects in the cup should be VERY dark brownish green. It should be almost opaque. It should NOT be the color of tea or weak coffee. |
#5
|
|||
|
|||
![]()
**** STINKS....
Give it time, sounds like you have a high nutrient tank. What skimmer did you end up getting ??? "KurtG" wrote in message ... I removed all my mechanical filtration and bio-balls. That was a great suggestion as my skimmer is now picking up 2-3x the debris as before. Problem is that now the skimmer reeks bad! Putrid bad! I was emptying it once a day, and started twice a day. Problem is that by it's very design, it has air flowing through it and the aroma isn't the most appealing for living room. (Of course, I've opened the windows now due to nicer weather.) Any ideas? I can hope that this will settle down eventually. --Kurt |
#6
|
|||
|
|||
![]()
TheRock wrote:
**** STINKS.... Give it time, sounds like you have a high nutrient tank. What skimmer did you end up getting ??? ASM G4. Yeah, it does seem like I'm on the high scale of nutrients although my nitrates have never been lower. My diatom problem has burned itself out as well. --Kurt |
#7
|
|||
|
|||
![]() It's actually a ASM G3. My mistake. It did settle down. I think it's just settling down again after removing the bioballs/filter pads and adding stronger power heads. My diatoms bloomed again over the weekend. Arg, I hope my phosphate and nitrate reactors arrive soon. --Kurt KurtG wrote: TheRock wrote: **** STINKS.... Give it time, sounds like you have a high nutrient tank. What skimmer did you end up getting ??? ASM G4. Yeah, it does seem like I'm on the high scale of nutrients although my nitrates have never been lower. My diatom problem has burned itself out as well. --Kurt |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need Recommendations for protein skimmer, powerheads and heater | pm3009 | Reefs | 11 | February 10th 07 08:08 PM |
The perfect protein skimmer.. | Benjamin Slade | Reefs | 3 | June 30th 04 06:35 AM |
protein skimmer issue | BigHaig | Reefs | 1 | January 12th 04 06:01 PM |
Protein skimmer question | Mark Breithaupt | Reefs | 9 | December 1st 03 10:42 PM |
hooking up protein skimmer | Pete | Tech | 2 | July 21st 03 03:51 AM |