![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I just bought Checker PH tester by Hanna Instruments and have a question
about calibration kit. It says in the manual that I have to empty powder in 100ml of water but I heard that you can split capsules up to 15 times. That's what I read "May enough buffer for about 15 calibrations if you are not wasteful." Also what water should I use? Can I use 1gal. Jewel or Dominicks drinking water? |
#2
|
|||
|
|||
![]()
I think it means each capsule is equivalent to about ~5 20ml premixed
sachets of Ph4 solution etc totalling 100ml that usually come with pH meter kits like Pinpoint/Hanna meters. 15 I think refers to the combined 5 pH 4 sachets, 5 pH7's and 5 pH10's? totalling 15 packets. "-=Almazick=-" wrote in message . net... I just bought Checker PH tester by Hanna Instruments and have a question about calibration kit. It says in the manual that I have to empty powder in 100ml of water but I heard that you can split capsules up to 15 times. That's what I read "May enough buffer for about 15 calibrations if you are not wasteful." Also what water should I use? Can I use 1gal. Jewel or Dominicks drinking water? |
#3
|
|||
|
|||
![]() "-=Almazick=-" wrote in message . net... I just bought Checker PH tester by Hanna Instruments and have a question about calibration kit. It says in the manual that I have to empty powder in 100ml of water but I heard that you can split capsules up to 15 times. That's what I read "May enough buffer for about 15 calibrations if you are not wasteful." Also what water should I use? Can I use 1gal. Jewel or Dominicks drinking water? I just went to a Hydroponics store and purchased the liquid PH4 and PH7. No messing around mixing. Rick |
#4
|
|||
|
|||
![]()
On Sat, 4 Oct 2003 05:19:26 UTC, "-=Almazick=-"
wrote: I just bought Checker PH tester by Hanna Instruments and have a question about calibration kit. It says in the manual that I have to empty powder in 100ml of water but I heard that you can split capsules up to 15 times. That's what I read "May enough buffer for about 15 calibrations if you are not wasteful." Also what water should I use? Can I use 1gal. Jewel or Dominicks drinking water? It probably doesn't make a *big* difference so long as you make it with soft water; but prudence says to use distilled water (or de-ionized) if you want to be sure the calibration is any good. Available in gallons, for not much money, in any supremarket I've looked in. (Don't store your pH electrodes in distilled water, ever.) -- http://www.dandrake.com/ In the days after September 11, Yahoo searches for Nostradamus outnumbered those for Osama bin Laden and Sex, combined. |
#5
|
|||
|
|||
![]()
How should I store Ph electorde?
"Dan Drake" wrote in message news:vhIsdqY67dTD-pn2-Q6UjR8S8XOd1@localhost... On Sat, 4 Oct 2003 05:19:26 UTC, "-=Almazick=-" wrote: I just bought Checker PH tester by Hanna Instruments and have a question about calibration kit. It says in the manual that I have to empty powder in 100ml of water but I heard that you can split capsules up to 15 times. That's what I read "May enough buffer for about 15 calibrations if you are not wasteful." Also what water should I use? Can I use 1gal. Jewel or Dominicks drinking water? It probably doesn't make a *big* difference so long as you make it with soft water; but prudence says to use distilled water (or de-ionized) if you want to be sure the calibration is any good. Available in gallons, for not much money, in any supremarket I've looked in. (Don't store your pH electrodes in distilled water, ever.) -- http://www.dandrake.com/ In the days after September 11, Yahoo searches for Nostradamus outnumbered those for Osama bin Laden and Sex, combined. |
#6
|
|||
|
|||
![]()
I think it's usually stored in Ph 4 solution and KCl(Potassium chloride)
sold in gardening/hydoponics as potash. DO NOT use K2SO4(Pottasium sulphate) also labelled as potash depending on the brand. "-=Almazick=-" wrote in message . net... How should I store Ph electorde? "Dan Drake" wrote in message news:vhIsdqY67dTD-pn2-Q6UjR8S8XOd1@localhost... On Sat, 4 Oct 2003 05:19:26 UTC, "-=Almazick=-" wrote: I just bought Checker PH tester by Hanna Instruments and have a question about calibration kit. It says in the manual that I have to empty powder in 100ml of water but I heard that you can split capsules up to 15 times. That's what I read "May enough buffer for about 15 calibrations if you are not wasteful." Also what water should I use? Can I use 1gal. Jewel or Dominicks drinking water? It probably doesn't make a *big* difference so long as you make it with soft water; but prudence says to use distilled water (or de-ionized) if you want to be sure the calibration is any good. Available in gallons, for not much money, in any supremarket I've looked in. (Don't store your pH electrodes in distilled water, ever.) -- http://www.dandrake.com/ In the days after September 11, Yahoo searches for Nostradamus outnumbered those for Osama bin Laden and Sex, combined. |
#7
|
|||
|
|||
![]() "Tasslehoff" wrote in message u... I think it's usually stored in Ph 4 solution and KCl(Potassium chloride) sold in gardening/hydoponics as potash. DO NOT use K2SO4(Pottasium sulphate) also labelled as potash depending on the brand. I have a Hanna Instruments PH tester and my instructions are to store in PH 7 solution. You should check the manufactures specifications for your particular unit . Rick |
#8
|
|||
|
|||
![]()
On Tue, 7 Oct 2003 18:12:25 UTC, "Rick" wrote:
"Tasslehoff" wrote in message u... I think it's usually stored in Ph 4 solution and KCl(Potassium chloride) sold in gardening/hydoponics as potash. DO NOT use K2SO4(Pottasium sulphate) also labelled as potash depending on the brand. I have a Hanna Instruments PH tester and my instructions are to store in PH 7 solution. You should check the manufactures specifications for your particular unit . I once Googled the subject pretty widely and found a bunch of recommendations including those of some reputable suppliers. The favorite seems to be 4-molar KCl. That's 300 grams (298 would be quite unnecessary accuracy) in one liter of solution. pH 7 buffer is also suggested, and pH 4 also. -- http://www.dandrake.com/ In the days after September 11, Yahoo searches for Nostradamus outnumbered those for Osama bin Laden and Sex, combined. |
#9
|
|||
|
|||
![]()
I have the Milwaukee SMS122 pH controller and found out the following from
the company: 1. The 4.01 isn't necessary since the monitor is used mostly for aquariums and a pH that low is usually not found. In fact, they don't include one with their monitor. 2. It is only necessary to dip the tip of the probe into about 3/4 inch of calibration solution. 3. De-ionized, RO or bottled drinking water can be used to rinse and store the probe. "Dan Drake" wrote in message news:vhIsdqY67dTD-pn2-Q6UjR8S8XOd1@localhost... On Sat, 4 Oct 2003 05:19:26 UTC, "-=Almazick=-" wrote: I just bought Checker PH tester by Hanna Instruments and have a question about calibration kit. It says in the manual that I have to empty powder in 100ml of water but I heard that you can split capsules up to 15 times. That's what I read "May enough buffer for about 15 calibrations if you are not wasteful." Also what water should I use? Can I use 1gal. Jewel or Dominicks drinking water? It probably doesn't make a *big* difference so long as you make it with soft water; but prudence says to use distilled water (or de-ionized) if you want to be sure the calibration is any good. Available in gallons, for not much money, in any supremarket I've looked in. (Don't store your pH electrodes in distilled water, ever.) -- http://www.dandrake.com/ In the days after September 11, Yahoo searches for Nostradamus outnumbered those for Osama bin Laden and Sex, combined. |
#10
|
|||
|
|||
![]() "Jim K" wrote in message om... I have the Milwaukee SMS122 pH controller and found out the following from the company: 1. The 4.01 isn't necessary since the monitor is used mostly for aquariums and a pH that low is usually not found. In fact, they don't include one with their monitor. 2. It is only necessary to dip the tip of the probe into about 3/4 inch of calibration solution. 3. De-ionized, RO or bottled drinking water can be used to rinse and store the probe. from the instruction manual of my Hana Instrument which I believe also makes the Checker model. Note the caps are theirs DO NOT USE DISTILLED OR DEONIZED WATER FOR STORAGE PURPOSES. Rick |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Alternative pH calibration solutions? Any DIY recipes? | John | Reefs | 7 | August 4th 04 02:18 AM |