![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
I live in the UK and have a 54x24x24 very well planted freshwater
community tank. 3 x 36W Triton flourescent tubes 12 hrs/day 2 x 150W MH 6,500k 8hrs/day Eheim 2217 Canister filter Eheim 2329 wet/dry filter With the exception of vallis and cabomba, the other 180ish plants (mixed varieties) are barely growing, so I've invested in a pressureized CO2 setup with pH controller which I will have in operation by the end of next week. I've been using Seachem Flourish, Flourish Excel, Flourish Trace and Flourish Iron to help the plants along and there has been some slight growth over the past couple of weeks - problem is the cost of these additives - it cost £73 for enough of the above Flourish products to last about 6 months, then I came across Greg Watson's site..... As far as I can tell, I need to get hold of ingredients for Plantex CSM+B which comprises- 1.5% Magnesium (MG), 1.5% Magnesium (cheleted) 0.10% Copper (Cu) 7.0% Iron (Fe - cheleted), 2.0% Maganese (Mn - Cheleted) 0.06% Molybedenum (MO) 0.40% Zinc (Zn - cheleted). Boric Acid A Google UK search for Plantex shows links to Greg's site plus some others that sell weed-supressing membranes (!!??) As I'm in the UK I doubt that shipping the chemicals from Canada is going to be cost effective or allowed by Customs. Rex Grigg's site gives some links to UK suppliers, but I can't find the whole list of ingredients. To make up the macronutrient mix I need- MgSO4+7H2O (Magnesium Sulfate) K2SO4 (Potassium Sulfate) KNO3 Is it possible to buy the ingredients to make CSM+B and the macronutrients in the UK or is there a 'UK alternative'? The results from my Nutrafin test kit indicate - Date Temp Time NO2 PH Fe Fe GH KH PO4 NO3 NH3/NH4 Ca chelated 15/07/2006 14.30 0.1 240 140 7 Tap water 15/07/2006 26.2 14.00 0.1 8 0 0 240 100 2.0 50 0 120 Tank Water 22/07/2006 28.2 13.00 0.1 8.2 0 0.01 240 110 1.5 40 0 90 Tank Water I'm a little suspicious of the pH reading - the tap water here is hard/very hard (acording to our water supplier) and comes up around 7.4.and a pH test strip (litmus paper) gives 6.8 (!) Matching the colours on the nutrafin kit I guess depends partly on how colour blind I am. I find that depending on the angle at which the test tube is held against the colour matcher almost any shade of the desired colour could be interpreted, so I wouldn't say the above readings are gospel. Many thanks in advance Pete |
#2
|
|||
|
|||
![]() I thought that table may not come out as hoped.... here's a precis - tank temp 26C week1/week2 NO2 0.1/0.1 pH 8.0 / 8.2 Fe 0.0/0.0 Fe Chelated 0.0/0.01 GH 240/240 KH 100/110 PO4 2.0/1.5 NO3 50/40 NH3/NH4 0/0 Ca 120/90 Tap water NO2 0.1 GH 240 KH 140 NO3 7 |
#3
|
|||
|
|||
![]()
Given that the CSM+B stuff is cheap by the pound and not flammable I'd
just mail order it frankly. I'm not aware of a substitute. Apparanly you cam mail order KN03 which is a little scary but, whatever. It' usually available locally as stump remover though or any good chemical supply hose shold have it. The amount of potassium sulphate is so damn low and since the phosphate and nitrate are potassium salts I'm not sure it even makes any sense to add it. Magnesium sulphate is "epsom salts" found in any chemists. -- Need Mercedes parts? http://parts.mbz.org Richard Sexton | Mercedes stuff: http://mbz.org 1970 280SE, 72 280SE | Home pages: http://rs79.vrx.net 633CSi 250SE/C 300SD | http://aquaria.net http://killi.net |
#4
|
|||
|
|||
![]()
I order from Greg, even though I'm in Canada. His stuff is so cheap, that
shipping is not an issue. I'm not sure what your customs inspections are like, but all my packages have been opened and inspected. Especially the KNO3. ![]() I bought my CSM+B locally, as I'm only a few miles from the plant. I add Potassium as KCL (local) and Phosphate as mono Potassium Phosphate (Greg). Epsom Salts for the Magnesium of course. You might also try local hydroponics shops for this stuff. "Pete" wrote in message ... I live in the UK and have a 54x24x24 very well planted freshwater community tank. 3 x 36W Triton flourescent tubes 12 hrs/day 2 x 150W MH 6,500k 8hrs/day Eheim 2217 Canister filter Eheim 2329 wet/dry filter With the exception of vallis and cabomba, the other 180ish plants (mixed varieties) are barely growing, so I've invested in a pressureized CO2 setup with pH controller which I will have in operation by the end of next week. I've been using Seachem Flourish, Flourish Excel, Flourish Trace and Flourish Iron to help the plants along and there has been some slight growth over the past couple of weeks - problem is the cost of these additives - it cost £73 for enough of the above Flourish products to last about 6 months, then I came across Greg Watson's site..... As far as I can tell, I need to get hold of ingredients for Plantex CSM+B which comprises- 1.5% Magnesium (MG), 1.5% Magnesium (cheleted) 0.10% Copper (Cu) 7.0% Iron (Fe - cheleted), 2.0% Maganese (Mn - Cheleted) 0.06% Molybedenum (MO) 0.40% Zinc (Zn - cheleted). Boric Acid A Google UK search for Plantex shows links to Greg's site plus some others that sell weed-supressing membranes (!!??) As I'm in the UK I doubt that shipping the chemicals from Canada is going to be cost effective or allowed by Customs. Rex Grigg's site gives some links to UK suppliers, but I can't find the whole list of ingredients. To make up the macronutrient mix I need- MgSO4+7H2O (Magnesium Sulfate) K2SO4 (Potassium Sulfate) KNO3 Is it possible to buy the ingredients to make CSM+B and the macronutrients in the UK or is there a 'UK alternative'? The results from my Nutrafin test kit indicate - Date Temp Time NO2 PH Fe Fe GH KH PO4 NO3 NH3/NH4 Ca chelated 15/07/2006 14.30 0.1 240 140 7 Tap water 15/07/2006 26.2 14.00 0.1 8 0 0 240 100 2.0 50 0 120 Tank Water 22/07/2006 28.2 13.00 0.1 8.2 0 0.01 240 110 1.5 40 0 90 Tank Water I'm a little suspicious of the pH reading - the tap water here is hard/very hard (acording to our water supplier) and comes up around 7.4.and a pH test strip (litmus paper) gives 6.8 (!) Matching the colours on the nutrafin kit I guess depends partly on how colour blind I am. I find that depending on the angle at which the test tube is held against the colour matcher almost any shade of the desired colour could be interpreted, so I wouldn't say the above readings are gospel. Many thanks in advance Pete |
#5
|
|||
|
|||
![]()
Pete, check
www.aquaessentials.com They sell the KNO3, KH2PO4, CMS etc Local UK vendor, also sells ADA products like Aqua soil. Aqua soil + EI dosing does a really great job , all you focus on is CO2 tweaking then. Regards, Tom Barr www.BarrReport.com Pete wrote: I live in the UK and have a 54x24x24 very well planted freshwater community tank. 3 x 36W Triton flourescent tubes 12 hrs/day 2 x 150W MH 6,500k 8hrs/day Eheim 2217 Canister filter Eheim 2329 wet/dry filter With the exception of vallis and cabomba, the other 180ish plants (mixed varieties) are barely growing, so I've invested in a pressureized CO2 setup with pH controller which I will have in operation by the end of next week. I've been using Seachem Flourish, Flourish Excel, Flourish Trace and Flourish Iron to help the plants along and there has been some slight growth over the past couple of weeks - problem is the cost of these additives - it cost £73 for enough of the above Flourish products to last about 6 months, then I came across Greg Watson's site..... As far as I can tell, I need to get hold of ingredients for Plantex CSM+B which comprises- 1.5% Magnesium (MG), 1.5% Magnesium (cheleted) 0.10% Copper (Cu) 7.0% Iron (Fe - cheleted), 2.0% Maganese (Mn - Cheleted) 0.06% Molybedenum (MO) 0.40% Zinc (Zn - cheleted). Boric Acid A Google UK search for Plantex shows links to Greg's site plus some others that sell weed-supressing membranes (!!??) As I'm in the UK I doubt that shipping the chemicals from Canada is going to be cost effective or allowed by Customs. Rex Grigg's site gives some links to UK suppliers, but I can't find the whole list of ingredients. To make up the macronutrient mix I need- MgSO4+7H2O (Magnesium Sulfate) K2SO4 (Potassium Sulfate) KNO3 Is it possible to buy the ingredients to make CSM+B and the macronutrients in the UK or is there a 'UK alternative'? The results from my Nutrafin test kit indicate - Date Temp Time NO2 PH Fe Fe GH KH PO4 NO3 NH3/NH4 Ca chelated 15/07/2006 14.30 0.1 240 140 7 Tap water 15/07/2006 26.2 14.00 0.1 8 0 0 240 100 2.0 50 0 120 Tank Water 22/07/2006 28.2 13.00 0.1 8.2 0 0.01 240 110 1.5 40 0 90 Tank Water I'm a little suspicious of the pH reading - the tap water here is hard/very hard (acording to our water supplier) and comes up around 7.4.and a pH test strip (litmus paper) gives 6.8 (!) Matching the colours on the nutrafin kit I guess depends partly on how colour blind I am. I find that depending on the angle at which the test tube is held against the colour matcher almost any shade of the desired colour could be interpreted, so I wouldn't say the above readings are gospel. Many thanks in advance Pete |
#6
|
|||
|
|||
![]()
On 28 Jul 2006 20:50:49 -0700, wrote:
Pete, check www.aquaessentials.com They sell the KNO3, KH2PO4, CMS etc Local UK vendor, also sells ADA products like Aqua soil. Aqua soil + EI dosing does a really great job , all you focus on is CO2 tweaking then. Regards, Tom Barr www.BarrReport.com Many thanks for your replies guys. I can't believe that I ordered all the Flourish stuff from www.aquaessentials.co.uk - I didn't even notice the PMDD link on the left!! Thanks again from me and my wallet!! Pete |
#7
|
|||
|
|||
![]() Pete wrote: Many thanks for your replies guys. I can't believe that I ordered all the Flourish stuff from www.aquaessentials.co.uk - I didn't even notice the PMDD link on the left!! Thanks again from me and my wallet!! Pete If you need to relieve your guilt, I do accept paypal ![]() Regards, Tom Barr www.BarrReport.com |
#9
|
|||
|
|||
![]()
On 30 Jul 2006 22:00:44 -0700, wrote:
Pete wrote: Many thanks for your replies guys. I can't believe that I ordered all the Flourish stuff from www.aquaessentials.co.uk - I didn't even notice the PMDD link on the left!! Thanks again from me and my wallet!! Pete If you need to relieve your guilt, I do accept paypal ![]() Regards, Tom Barr www.BarrReport.com Giult duly relieved. I signed-up a couple if days ago.... Pete |
#10
|
|||
|
|||
![]()
On Fri, 28 Jul 2006 18:26:31 +0100, Pete
wrote: I live in the UK and have a 54x24x24 very well planted freshwater community tank. 3 x 36W Triton flourescent tubes 12 hrs/day 2 x 150W MH 6,500k 8hrs/day Eheim 2217 Canister filter Eheim 2329 wet/dry filter With the exception of vallis and cabomba, the other 180ish plants (mixed varieties) are barely growing, so I've invested in a pressureized CO2 setup with pH controller which I will have in operation by the end of next week. I've been using Seachem Flourish, Flourish Excel, Flourish Trace and Flourish Iron to help the plants along and there has been some slight growth over the past couple of weeks - problem is the cost of these additives - it cost £73 for enough of the above Flourish products to last about 6 months, then I came across Greg Watson's site..... As far as I can tell, I need to get hold of ingredients for Plantex CSM+B which comprises- 1.5% Magnesium (MG), 1.5% Magnesium (cheleted) 0.10% Copper (Cu) 7.0% Iron (Fe - cheleted), 2.0% Maganese (Mn - Cheleted) 0.06% Molybedenum (MO) 0.40% Zinc (Zn - cheleted). Boric Acid A Google UK search for Plantex shows links to Greg's site plus some others that sell weed-supressing membranes (!!??) As I'm in the UK I doubt that shipping the chemicals from Canada is going to be cost effective or allowed by Customs. Rex Grigg's site gives some links to UK suppliers, but I can't find the whole list of ingredients. To make up the macronutrient mix I need- MgSO4+7H2O (Magnesium Sulfate) K2SO4 (Potassium Sulfate) KNO3 Is it possible to buy the ingredients to make CSM+B and the macronutrients in the UK or is there a 'UK alternative'? The results from my Nutrafin test kit indicate - Date Temp Time NO2 PH Fe Fe GH KH PO4 NO3 NH3/NH4 Ca chelated 15/07/2006 14.30 0.1 240 140 7 Tap water 15/07/2006 26.2 14.00 0.1 8 0 0 240 100 2.0 50 0 120 Tank Water 22/07/2006 28.2 13.00 0.1 8.2 0 0.01 240 110 1.5 40 0 90 Tank Water I'm a little suspicious of the pH reading - the tap water here is hard/very hard (acording to our water supplier) and comes up around 7.4.and a pH test strip (litmus paper) gives 6.8 (!) Matching the colours on the nutrafin kit I guess depends partly on how colour blind I am. I find that depending on the angle at which the test tube is held against the colour matcher almost any shade of the desired colour could be interpreted, so I wouldn't say the above readings are gospel. Many thanks in advance Pete Hi Pete, You chemistry types seem to ask for problems. I take the simple approach, but limit the variety of plants. Just to show what I mean by simple: I make 20% water changes twice weekly, no additives, the refill is straight from the tap. I use no fertilizers for the live plants, they live on the waste from the fish. I don't use bio filters, just a simple filter media, no charcoal, no CO2. The lights are all (5 tanks) "low light" and the plants chosen for low light conditions. I can understand the desire for exotic environments, but there does appear to be a price to be paid. I just have to weed my plants every few months. dick |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
PMDD recipe from HomeGrown Hydroponics: review | KMS | Plants | 4 | July 17th 03 08:19 PM |