A Fishkeeping forum. FishKeepingBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » FishKeepingBanter.com forum » ponds » General (alternative)
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

New Pump



 
 
Thread Tools Display Modes
  #1  
Old July 28th 03, 04:59 PM
Simon Avery
external usenet poster
 
Posts: n/a
Default New Pump

"Rodney Pont" wrote:

Hello Rodney

Price for the higher power pumps seem to rise dramatically
though. I've used twin smaller pumps (200watt general
purpose submersibles, not something badged as "pond"
because that seems to put the price up for no particular


RP A couple of years ago I would have agreed with you Simon but
RP with the new ranges things have changed. For example the
RP Maximus 9000 can shift 9080lph, has a maximum head of 5.5m
RP and only uses 150watts so can be run for about œ75 per year.
RP It can be got for about œ110 from various places on the web.

Wow, that's damned impressive - looks like things have definately
changed recently.

RP I had a look at screwfix and their pumps are from 200 to 300
RP watts and shift 7500lph. Yes they are cheaper to buy but
RP even the 200 watt one costs an extra œ25 per year to run and
RP over the life of the pump it can more than cover the
RP difference.

F'sure, I have their 200watt pump which is lovely. Maybe my maths is a
bit rusty, but I budgeted 50-60ukp/year running 24/7. Hard to notice
in the general noise though.

RP I agree with your point about two pumps, we have one for the
RP waterfall and one for the filter so if one fails there is
RP water flow while it's replaced.

One thing you tend to learn the hard way is to keep the electrical
connection close to the pump, at least if you've buried the supply,
and to use decent re-usable connectors. Quick job to replace a broken
pump then, instead of having to rip up half a patio...

--
Simon Avery, Dartmoor, UK Ý http://www.digdilem.org/

  #2  
Old February 2nd 11, 06:51 PM
micgalnixon micgalnixon is offline
Junior Member
 
First recorded activity by FishkeepingBanter: Feb 2011
Posts: 6
Default

I agree with your point about the two pumps, we have a waterfall and a filter, if you do not have the water flow, while its replaced.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
What size pump??? GoldLexus General 3 June 16th 04 05:30 PM
Have you ever measured real water pump output flow rate? Pszemol Reefs 26 January 19th 04 04:33 AM
Pump, sump and elbow on the intake Pszemol Reefs 6 January 3rd 04 01:18 AM
pump heat transfer; recommendations ? Kevin M. Smith Reefs 2 October 11th 03 11:43 PM
I need a good water pump for my pond Carlos Falcon General 1 August 16th 03 02:19 AM


All times are GMT +1. The time now is 04:25 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 FishKeepingBanter.com.
The comments are property of their posters.